top of page

Well Flow Inspection

When you are making the essential investment of buying a house, you need to get a well-flow inspection from a reputed water testing company like Maxwell Home Inspection Services LLC.

Plumbers

Several lenders have necessities for your well. With many loan-providing companies, with potential you need the well to produce 3 gallons per 60 seconds for 2 hours, or 5 gallons per 60 seconds for 4 hours.

 

Given the requirements, it is exactly thinking to have our water professionals perform the testing as an alternative to a normal home inspector.

 

Throughout the flow-rate test, we use a meter to calculate the accuracy of water running in a hose to check how much water is pumped from the well. At the various end of the test as an alternative than to “guesstimate” as is repeatedly the case during home inspections.

Well-Flow-Inspections.JPG

Save Money With a Proper Flow Test

Within some days of conducting the flow test, a duplicate copy of the test result will send to you with our expert suggestions and the outline of further improvement. Putting in two or three hundred bucks forthright can save you a large number of dollars over the long haul by playing out an appropriate water flow test. Have a good sense of safety with our exact outcomes.

Comprehensive Well-Flow Inspection

  • Appropriately sealed and fixed wellhead

  • Beginning well static (this is the profundity to water from ground level)

  • Begin flow rate test at the ideal flow rate

  • Gather the microscopic organisms/bacteria test set expected for that particular mortgage

  • During the flow test, measure the wattage on the pump system to confirm that the pump is running perfectly

  • Checking the pressure tank and tank tee fittings whether the tank is probably waterlogged or rusted which may need replacement

  • Make sure that the framework gives off an impression of running accurately and compressing the lines. Relatively you will not discover that the underground or down the well waterline has a leak once you shift into your new house.

  • At the end of the well-flow inspection, evaluate and conclude the statics (check the intensity of water from ground level after the well has been pumped for the period of the flow test).

  • Re-seal the well cap properly; if necessary replace it with a clean fixed top.

To schedule your Well Flow Inspection, please call our Team: 1-518-344-4920.

bottom of page